Finden Sie schnell herstellung von kunststoffen für Ihr Unternehmen: 82 Ergebnisse

TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear POLYIMIDE WITH 15% GRAPHITE TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear behaviour. Thanks to its self lubricating property, TECASINT 2021 is well suited to lubricated and dry applications.

TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal and electrical conductivity. These are accompanied by high purity and low outgassing in accordance with ESA regulation ECSS-Q-70-20. Its previous name was SINTIMID Pur HT.

TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, i POLYIMIDE WITH 15 % MOS2 TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, in a vacuum or in inert gases (techn. dry). The plastic displays low outgassing in accordance with ESA regulation ECSS-Q-70-20. Alternative to Vespel SP3.

Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability (HDT/A=470°C), extremely low moisture absorption and high mechanical rigidity. UNFILLED POLYIMIDE Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis-a-vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS-Q-70-20.

Rollstriegel in der Landwirtschaft. Durch das sich drehende Arbeitswerkzeug wird Unkraut entwurzelt und die Bestockung der Kulturen gefördert

Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strengt UNFILLED POLYIMIDE Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strength, TECASINT 4011 has high elongation at break and toughness. Rigidity and modulus are significantly increased vis-a-vis conventional polyimides in a temperature range up to 260°C. It also has minimal thermal and electrical conductivity. The plastic is highly pure and displays low outgassing in accordance with ESA regulation ECSS-Q-70-20.

TECASINT 4121 is based on the base polymer TECASINT 4111, plus 15% graphite. The material is particularly suitable for tribological applications thanks to its improved friction and wear behaviour. Thanks to its self lubricating property, TECASINT 4121 is well suited to dry applications.

Starting with the base polymer TECASINT 4011, TECASINT 4021 with 15% graphite has been developed. Thanks to the improved friction and wear properties, TECASINT 4011 is particularly suitable for tribol POLYIMIDE WITH 15 % GRAPHITE Starting with the base polymer TECASINT 4011, TECASINT 4021 with 15% graphite has been developed. Thanks to the improved friction and wear properties, TECASINT 4011 is particularly suitable for tribological applications. It is also suitable for dry applications since the material is self lubricating.

Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low POLYIMIDE WITH 15 % GRAPHITE AND 10 % PTFE Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low coefficient of friction. Owing to its self lubricating property, TECASINT 2061 is very good for dry application. The material is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

Kunststoff-Bauteil für Anwendungen im Bereich Materialfluss und Lagerlogistik-Lösungen

Wir fertigen Hardyscheiben (Gelenkscheiben) mit und ohne Gewebeeinlage in Einzelfertigung, nach Muster oder Zeichnung. Die Hardyscheibe (Gelenkscheibe) ist eine aus Gummi gefertigte Scheibe, die als elastische Kupplung z. B. bei Kardanwellen (Gelenkwellen) dafür sorgt, dass leichte Winkel-Versetzungen der beiden Achsen ausgeglichen werden. Weiters werden jene Stöße gedämpft, die beim Wechsel der Drehzahl oder dem Anlauf der Welle entstehen. Wir fertigen Hardyscheiben (Gelenkscheiben) mit und ohne Gewebeeinlage in Einzelfertigung, nach Muster oder Zeichnung. Schicken Sie uns eine Anfrage oder rufen Sie uns an, wenn sie Ersatz für Ihre Hardyscheibe benötigen. Wir freuen uns auf Ihren Kontakt, Ihr Team von Dipl.-Ing. Alexander Kubai - fachmännischer Nachbau von Hardyscheiben

Bauteil für Anwendung in der Landwirtschaft (Auflesen und Fördern von Schnittgras)

Starting with the base polymer TECASINT 1011, TECASINT 1031 has been developed. This material contains 40% graphite, unlike the starting material. TECASINT 1031 has a very high resistance to thermal a

TECASINT 1021 black has been developed from the base polymer TECASINT 1011 natural. Unlike TECASINT 1011, however, it contains 15% graphite. The material has improved friction and wear properties for tribological applications. TECASINT 1021 is suitable for both lubricated and dry applications since it is self lubricating.

The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. UNFILLED POLYIMIDE The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation. TECASINT 5111 natural is produced as polyimide sheet, polyimide rod and tube.

Kunststoffscharnier für einen Klapptisch

Starting with the base polymer TECASINT 5011, TECASINT 5051 with 30 % glass fibre has been developed. This material is characterised by reduced thermal elongation, reduced moisture absorption and high WITH 30 % GLASS FIBRE Starting with the base polymer TECASINT 5111, TECASINT 5051 with 30 % glass fibre has been developed. This material is characterised by reduced thermal elongation, reduced moisture absorption and high wear strength during chip test applications in the semiconductor industry. It has good electrical insulation properties and surface hardness, and also high rigidity. The glass transition temperature is 330°C, while the maximum service temperature may be – for a short time – up to 300 °C.

Kunststoffbauteil, an dem Golftees und Pitch-Gabel befestigt werden. Zusätzlich dient das Bauteil als Werbefläche, da sich das Bauteil bedrucken lässt.

Gummi-Euter in naturgetreuer Ausführung der Zitzen; mit patentiertem Schaumgummi-Einsatz, um ein gefühlsechtes Melken zu gewährleisten. Dazu passend lieferbar ist ein Gestell. Das Melkgestell besteht aus einem Rahmen mit Deckplatte, zwischen welche das Gummieuter eingeklemmt wird. Die vier Beine sind leicht auswechselbar, mit eingeschobenem Gummistoppel als Fuß dienend. Das Gummieuter wurde ursprünglich für den Unterricht an landwirtschaftlichen Fachschulen entwickelt, um den zukünftigen Landwirten das Melken von Hand beizubringen. Diese Fähigkeit ist auch in unserer modernen Zeit noch notwendig, da Melkmaschinen ausfallen können, die Kühe aber trotzdem gemolken werden müssen. Neuerdings wird unser Gummieuter auch im Tourismus eingesetzt (Wettmelken als "Hüttengaudi"). Standard-Ausführungen Das Gummieuter wird in den Ausführungen schwarz und weiß produziert. Dabei ist jedoch zu bedenken, dass die schwarze Qualität allgemein robuster ist. Für Einsatz in Schulen oder zum Wettmelken sollten nur die schwarzen Zitzen benutzt werden. Das Gestell ist erhältlich in den Ausführungen Edelstahl und Holz. Das Edelstahlgestell besteht komplett aus Edelstahl, ohne Lackierung. Das Holzgestell besteht aus einem Rahmen aus Mehrschichtplatte mit abschraubbaren Hartholzfüßen. Sonderausführungen Folgende Sonderausführungen können auf Bestellung geliefert werden:

Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The ma POLYIMIDE WITH 15 % GRAPHITE AND 10 % PTFE Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The material is self lubricating, which means it also has good properties in dry running conditions. TECASINT 1061 is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

Kunststoff-Bauteil für die Anwendung im Bereich Materialfluss und Lagerlogistik-Lösungen

Große Kühlakkus noch unbefüllt. Die Akkus werden einfach mit Wasser befüllt, mit dem mitgelieferten Deckel verschlossen und eingekühlt. Für Kühltaschen oder den Versand von wärmeempfindlichen Produkten (zB. verderbliche Produkte) Maße: L 405mm x B 215mm x H 30mm, Hartplastik